On 07, the gauge display is based on the time the button is pressed. Somebody made a custom controller on wake garage. There are a lot of details there that would also be helpful for troubleshooting. 

Hi All - Hoping to get educated on some options for a family ski/surf boat. I understand the two sports are quite conflicting, but looking for a boat that is capable of pulling recreational slalom skiers and new to the sport wake surfers.  Hoping to be in the 30-40k range so fully expecting to be looking at early 2000's boats. Full transparency, I asked the same question on the Mastercraft forum, and everyone pointed me here because the diamond hull was the best all around option on the market. Looking to see others thoughts!

Have seen a lot of Wakesetters, but also came across Sunscape and Sunsetter? Not sure the difference between the two. Would love to be educated on the different models as well as LSV vs LXI etc. I'm sure this has been answered in many threads on here, but I haven't come across it yet.

Any information is good information! 

Thanks all for your help!

You want to have a minimum of 0.5" clearance between the surf gate and the swim platform.  Removing the screw and loosening the bolts/nuts on the surfgate mounting bracket will allow for adjustment.  The outer "bling" plate usually needs to be removed to access the bolt heads.

2018 25lsv

Have not gotten any codes or errors but when I stow my power wedge the actuator keeps running...I can hear a low hum below the swim platform.  If I wiggle the wedge it shuts off.

In the debug mode I get the following readings

In stowed position it reads 200 with 3.38V

In Lift it reads    0 with .25V

Thanks

On the 2008 Indmar 340 Monsoon engines there are only two pre-cat O2 sensors.  There are also a pair of exhaust temperature sensors in the post-cat down pipe, but they are not O2 sensor.  Curious why you are looking for them?