Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Help: shower relay dependent on "ACC On"

EthanMitch

By EthanMitch,
in Modifications & Accessories

Recommended Posts

EthanMitch Ballast Buddy

EthanMitch

Posted
Posted

Hello friends! Last weekend I added a hot water shower to my 2018 22 VLX. The electrical is currently wired with the hot lead coming from the 10 amp circuit underneath the throttle followed by a rocker switch. The ground from the bus bar under the helm.

Unfortunately, the 10 amp hot lead labeled shower found under the throttle is always hot (provided the battery is on). This is problematic as sometimes I forget to turn the battery selector to off and I would hate for the shower switch to remain on and drain my battery.

I would prefer that the shower could only run when the system/malview is turned on.

The plan is to add a relay after the 10 amp circuit however I'm unsure where to get a trigger for the relay that will only be hot when the system is up and running.

Any best practices or suggestions?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go to topic listing
×
×
  • Create New...