Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Everude 175 hk 2013 wont crank or have spake in the plugs.

Recommended Posts

Switched a 2009 150 hk everude etec with a 2013 175 hk everude etec on my galia 650 ht. The new engine was running properly just days before i bougth it. 

When i switch the ignition you can see ecm turning on, and the tilt works, but the starter wont crank and there is no spark in the plugs.

When i make a circut shortcut to the starter, the starter cranks. 

I have checked all of the fuses and cant find the problem. 

The dealership said it wont be a problem to use the same ignition switch (throttle controller). Does anybody have a clue about what the problem can be? 





Link to comment

I'm pretty sure the tilt will work even with the key off.

It sounds like you pulled the safety lanyard and forgot to put it back in.  Check it.

If that isn't it, remove the engine harness connector and inspect it to make sure you didn't bend any pins when you assembled it.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...