Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2011 VLX tank not showing to be filled up in bow on the dash screen


southernfried

Recommended Posts

My bow fill/drain pumps work fine but it doesn't show it's full or being filled up on the malibu screen. What would one need to check to get that working on the dash/screen? 

Link to comment

Trace the wires where they run through any walls check for shorts.  Use a multi meter on the float switch mounted to the tank ,and check voltage as the tank fills. its probably a switch or a short in the wires.

Link to comment

I replaced the float inside my front tank that mesures the water level. That fixed it. I am about to replace one in the rear but its alot more difficult. Found a replacement on Amazon.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...