HyperRyd Designs Locker Nets

[Ronnie]

Going to try out these locker nets this year from HyperRyd Designs. Always looking for a place for wet jackets to keep them off the seats and floor.

@Murphy8166 Group Buy?

@Hyperryd

HyperRyd Designs

Locker Nets are back in stock!! 

Check out our new, Patented, HRD Locker Nets for the storage lockers of V-Drive boats.  These nets keep your gear stored above your locker ballast bags, inflated or deflated.  This allows

 you to fill your bags from the helm without worrying about your gear getting crushed by the ballast bags.  By storing your gear at the top of the lockers allows access to the gear from the swim step on most wake boats.  That also means you can put your wet gear away without bringing it into the cabin of the boat.  You can store around three to four vests on each side depending on sizes.  By keeping air around the gear it dries quicker and easier.  If you need access to the locker just lift up on one side to unsnap the rod and drop the net down in the locker hanging from the other side.  This allows you to store things in the locker on the way to the lake and put the net back in place once emptied and load up the nets.  

The nets are sold in pairs and come in 5 lengths (33", 29", 25", 21" & 17") to accommodate multiple boats.  The width is adjustable from 18"-24" in 1" increments just by changing the loop that the rods thread through.  The nets are high quality and the hardware is all stainless steel.

Space above ballast bags will vary from boat to boat and also depends on the size of the ballast bags. Check your clearance before you order.

[hethj7]

We are looking at their racks so would love a TMC discount or group buy potential.  The wife has been eyeing the locker nets too.  Right now we are on the fence but a TMC supporter discount would tip the scales for us.  

Edited March 28, 2023 by hethj7

[bcoppess23]

I just purchased a set of these last week!!  I love the surfboard racks they have.

[Livinlogs]

We love ours . They work perfectly. The way we use them is anyone coming out of the water puts wetsuits and vests on the nets . Wet stuff stays there rather than the cabin . When we get back home , they all come out to hang dry . Used them all season on the T250. Our shower handle rests there as well 

[CDAWake]

I would definitely be in for a group buy as well, I have been eyeing these. Thanks 

[SurfNAZ]

I will definitely join in on the group buy if it happens.

[604wakesurf]

I would join in also if they can be shipped to Canada.

[Murphy8166]

Working on this and hope to roll out some details by the EOD Friday.  Stay Tuned!!

[hethj7]

On 3/29/2023 at 12:40 PM, Murphy8166 said:

Working on this and hope to roll out some details by the EOD Friday.  Stay Tuned!!

Any updates on this?

[Ronnie]

@Murphy8166 was working on this. Hit a couple of obstacles last I heard. Group Buys aren't always easy.

[Figs]

I am also looking at these - 100% in for a group buy

[Poizin]

I’m in!

[hethj7]

Anyone know what diameter the G3.5 tower is?  I may break down and order a rack, but am not sure what clamps I need.  

[Bravotango]

Did they ever get a group buy together or a malibu crew discount code?

[Ronnie]

Couldn't get it put together. 

Let me see if anything has changed.

Ronnie

 

[hethj7]

Got to say, I am super happy with the one I picked up.  Yes, a group buy would be great, but for protected board storage these are probably the cheapest thing out there already.  Very well made!
 

 

[HollywoodBall]

Anyone running these in a 2018 22 MXZ by chance?

[devA22]

Im in on a group buy!

[Ronnie]

Still no response from Hyper ryd for a Group Buy

[SurfNAZ]

@Ronnie thanks for trying!

[jeffmx]

I talked to John today via email about a related item, and mentioned you were trying to get a group buy set up. Hopefully that helps get the ball rolling.

The overhead racks are great , we love ours and their customer support is the best!

Count me in on the group buy for the locker nets.

[Hamboats]

I’ll take some locker nets as well!  Thanks for giving it a shot @Ronnie and @jeffmx!!