Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

1990 Skier - Wet Seat Bottom


JohnBrabant

Recommended Posts

Posted (edited)

Haven't been on since last summer.  Nice to see this page again.  So the rear seat bottom cushion on my Skier is made of a piece of plywood that has a cushion mounted on it.  Pretty standard.  The design is pretty lousy.  The plywood bottom which is carpeted simply plops on the rugged floor, which as a ski boat, gets wet (duh!) and as a result the plywood gets pretty sopped with water.  I am thinking of screwing some kind of plastic wood strips to the plywood to create and air gap to allow air circulation so that the plywood (and floor under the cushion) will dry.  Has anyone else done this?  Are there any other fixes you all have thought of to deal with this situation.  Another thought I had was to coat the plywood with fiberglass resin and mat.  Looking for your input.  Many thanks for any help and advice offered.  -John

Edited by JohnBrabant
Link to comment

I like the idea of strips to keep the plywood off the floor.  You could go further and replace the whole plywood piece with HDPE panel so it won't rot.

Link to comment

You may want to look on Pontoonstuff.com. They have plastic risers that hold the fencing elevated to allow for increased airflow. You may be able to make that work on your project. Nice and cheap too. 

 

Link to comment

I always flipped my seat up after every use.  Never had an issue.  Same with the driver seat cushion.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...