Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2013 surf gate won't operate


Recommended Posts

For the last 5 years nearly every time I take my 2013 MXZ out, the surf gates will not deploy on the first run.  The screen indicates they are working but they are not.  I switch them from left to right, turn them off and on, throttle up to surf speed, stop the boat, turn battery power off, calibrate them, enable them, disable them-- you name it, they won't work.  And then magically they work.  I might have to try all of the above once or twenty times to make them work, you never know.  Seems like once they start to work they will continue to work during that surf session.  I have had the local dealer and multiple repair shops try to figure this out to no avail.  Both actuators have been replaced and they will deploy when hot wired.  This is super frustrating.  Any one have some advice?

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...