Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

What is this piece next to the engine divided for?


Recommended Posts

Brannon132

Hey guys,

I have fat sacks in my rear lockers and I was wondering what this is for and if I can take it out as it looks fairly sharp?

 Thanks, 

Brannon2ECB0B54-C5FD-40EB-8AF2-B368914AA4EF.thumb.jpeg.f6da7772729b30bee5c386cebb763a49.jpeg

Link to post
Brannon132

That’s good info to have, thanks guys!!!

 Brannon

Link to post

Probably best to remove if you don't use the table - could damage sacs. Also we replaced the motor divider rails with deeper aluminum ones. Keeps them from popping out when leaned on by full sacs.

  • Like 1
  • Thanks 2
Link to post
Brannon132

Do you have a link for the deeper divider rails?

Do you guys keep the table on the boat and if you do where do you put it?

Link to post

Instead of the thicker dividers, they make reinforcements like this.

https://www.wakemakers.com/engine-divider-panel-saver.html

I went to Home Depot and bought aluminum channel and made my own for less than $50 all in!!

 

I hauled my table around for years, and found it more of a pain to pull out and install, then put away.  I don't use it any more.

Link to post

I have had that table channel in all my boats with fat sacks and never had an assue. I wouldnt worry about it. On the rare accasion that I have the table on the boat thats ware I store it and I place a dixie cup over the sharp aluminum table mount when using fat sacks. no issues ever.

Link to post

have my sacs in for 3 years and no issues with table channel.  We don't even use the table so it sits permanently in the garage.

Link to post
On 7/20/2021 at 1:23 PM, Brannon132 said:

Do you have a link for the deeper divider rails?

Do you guys keep the table on the boat and if you do where do you put it?

Just search for aluminum trim channel - available lots of places.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...