Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Wedge Control Module


Recommended Posts

I’ve got a 2012 20VTX  bought second hand that didn’t come with a Wedge. I’ve been able to source a Power Wedge for it but and trying to sort out if I need the control module. The boat has Maliview and I’ve found the Power Wedge actuator connectors in the loom at the rear. My question is do I need the the Wedge Control Module or is it controlled through the Maliview and touch screen used to start the boat? Also could someone tell me where the module is located in the boat in case I’ve overlooked it.  Thanks

Link to post

You need the control module. You need to find out if you have 3 lobe or 5 lobe Lenco actuators so that you can order the correct control box for the actuators. 

 

The control module is usually under the helm, near the purple viper box. 

Edited by nemalibu
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...