Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Txi Tower support


Weave

Recommended Posts

Just purchased a 2021 20vtx with the xti tower. 
 

we have a bridge we travel under to get to a nice ski lake. 
 

when lowering the tower there is no where to rest the tower so it doesn’t damage the boat.  Has anyone come up with a way to support it while down.

 

last time my wife held it, and it was too heavy for her to hold.

Edited by Weave
Corrected tower model
Link to post
  • 2 weeks later...
7 minutes ago, oldjeep said:

Where does the tower sit when folded?

It folds back.  Turns out that by putting a square bumper pad on each side (top edge) of the boat, the tower rests on bumper nicely.

Top isn’t very descriptive,  not sure how else to describe it.  top of the hull(?), see arrow in photo.

F5E52FC9-35F2-47A8-836B-A96159C2EC78.jpeg

Edited by Weave
Photo
Link to post
5 minutes ago, Weave said:

Top isn’t very descriptive,  not sure how else to describe it.  top of the hull(?), see arrow in photo.

Gunwale - usually pronounced "gunnel".  Originally the structure was the "gun wale" on a sailing warship, a horizontal reinforcing band added at and above the level of a gun deck to offset the stresses created by firing artillery.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...