Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
MustGoFast

MIL Fault Code Alarm - Any ideas?

Recommended Posts

MustGoFast

Was out cruising yesterday and was just idling along (after about an hour of cruising) and got the alarm with the check engine picture and MIL/CEL thing.

No operating issues, temp and pressure fine.  Went into the settings to look at the fault codes nothing showed up in the active or inactive list there.

Anyone got any suggestions or thoughts on how to confirm/find what might have caused it?  Thought maybe just a misfire on the gas from last fall (yes it was treated) or something related to hours if it was like a car that auto triggered for routine service but I've never read about that before...

Share this post


Link to post
Share on other sites
daylorb

I just had a new fuel pump installed on mine, mil/cel, alarm going off.  I could see an inactive code though.

Share this post


Link to post
Share on other sites
onewake09
15 hours ago, MustGoFast said:

Was out cruising yesterday and was just idling along (after about an hour of cruising) and got the alarm with the check engine picture and MIL/CEL thing.

No operating issues, temp and pressure fine.  Went into the settings to look at the fault codes nothing showed up in the active or inactive list there.

Anyone got any suggestions or thoughts on how to confirm/find what might have caused it?  Thought maybe just a misfire on the gas from last fall (yes it was treated) or something related to hours if it was like a car that auto triggered for routine service but I've never read about that before...

This has happened several times on my 17’ a20. Completely random. No temp or oil pressure issues. And it never throws a code. Always goes away with a battery reset. I just run the thing. 

Share this post


Link to post
Share on other sites
RudyMuller

Check your wiring harnesses for you cam  phaser. It could be hitting your belt losing connection. 

Share this post


Link to post
Share on other sites
MustGoFast

Odly after this my power wedge stopped working - I think the actuator shorted out had a tech look the other day likely what tripped the alarm so anyway they are swapping that out this week.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...