Jump to content
200823LSV

2008 23LSV Power Wedge Problem

Recommended Posts

200823LSV

Need some advice.....Power Wedge will not go Down. Does not have fuse, rather a circuit breaker, pulled and replaced with 30a fuse, actuated via mux switch (recently replaced) wedge would not deploy and fuse did not blow. Checked voltage in medallion box, and have 12 v when toggling switch down on black wire, but never get power to white on either up or down. Can her very faint noise when we toggle the down switch at the actuators. Did check power at rear of boat in engine compartment as well when toggling down and had 12v on the black wire. Any help/advice would be greatly appreciated. 

Share this post


Link to post
Share on other sites
200823LSV

Forgot to mention, attempted to calibrate to fix, but the only thing that changed was the position gauge went from up to down, while wedge remained up. Attempted to re calibrate trying to get the gauge to read properly with no luck. Gauge still indicating down with wedge still up????

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×