Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Slurpee

Ported 12W6v3 in my 2016 22VLX

Recommended Posts

Slurpee

A little more monkeying around with cardboard templates and the router, and I've got my captain's speaker back! Yay!

I'm not sure how I'll get the two heater snorkels back into this mix, but I've got till winter to puzzle that out. :)

43064773612_d57eb66d5e_b.jpg

Share this post


Link to post
Share on other sites
shawndoggy

Looks great!

Share this post


Link to post
Share on other sites
BaBaLoO

Care to share the diamensions ofthe box? I have the same set up and looking to do the same! 

Share this post


Link to post
Share on other sites
Kblagg

Do you have a sketch or rough measurements or anything that you can share?

Share this post


Link to post
Share on other sites
Slurpee

I’ve got the Sketch-up file. PM me an email and I’ll send it to you for inspiration. I had to fit it in there with a heater core so it was tight. I recommend mocking it up out of cardboard and test fitting things. 

Share this post


Link to post
Share on other sites
Kblagg
20 hours ago, Slurpee said:

I’ve got the Sketch-up file. PM me an email and I’ll send it to you for inspiration. I had to fit it in there with a heater core so it was tight. I recommend mocking it up out of cardboard and test fitting things. 

PM Sent

Share this post


Link to post
Share on other sites
Slurpee

Howdy Folks.  Here's the sketchup plans for the sub box and the WinISD model of both it and the recommended ported design by JL for this driver. 

Lot's of y'all have PM'd me.  So here it is for everyone.  I have it mounted on some simple 2x4s laying on the floor to get the height right.

I recommend before you go cutting you mock this up with some cardboard and test fit.  Modify as you see fit.

Ported Box Design 8.skp

New Sub Box.wpr

JL Ported Sub Box.wpr

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...