Jump to content
Sign in to follow this  
Sasquatch

Perfect Pass Installation

Recommended Posts

Sasquatch

My brother in law is looking for someone to install a Perfect Pass on his 2002 Sundowner VLX. Can anyone recommend an installer in the Sacramento or Northern California area?? He lives near Placerville but will tow the VLX for the install.

Thanks in advance for the advise,

SAS Surprised.gif

Share this post


Link to post
Share on other sites
notoutenough

If you are even somwhat mecanically inclined, I'd say to do it yourself.

I installed mine on my '03 VLX and it only took me a few hours. The directions were

pretty easy to follow.

--Robert

Share this post


Link to post
Share on other sites
kb3
If you are even somwhat mecanically inclined, I'd say to do it yourself.

I installed mine on my '03 VLX and it only took me a few hours. The directions were

pretty easy to follow.

--Robert

I second the install it yourself plan. The instructions are very clear and simple to follow. There are only a few parts to install, and his 03 should be pre-wired in the dash for quick and easy wiring of the gauge. It took me about an hour for the total install. The hardest part being chasing the wiring back to the engine.

Share this post


Link to post
Share on other sites
Chef23

If you are even somwhat mecanically inclined, I'd say to do it yourself.

I installed mine on my '03 VLX and it only took me a few hours. The directions were

pretty easy to follow.

--Robert

I second the install it yourself plan. The instructions are very clear and simple to follow. There are only a few parts to install, and his 03 should be pre-wired in the dash for quick and easy wiring of the gauge. It took me about an hour for the total install. The hardest part being chasing the wiring back to the engine.

What did you do to run the wire back. I am about to do an installation on my 2002 Response LX and reading the directions that is one thing that looks a little challenging.

Share this post


Link to post
Share on other sites
notoutenough

If you are even somwhat mecanically inclined, I'd say to do it yourself.

I installed mine on my '03 VLX and it only took me a few hours. The directions were

pretty easy to follow.

--Robert

I second the install it yourself plan. The instructions are very clear and simple to follow. There are only a few parts to install, and his 03 should be pre-wired in the dash for quick and easy wiring of the gauge. It took me about an hour for the total install. The hardest part being chasing the wiring back to the engine.

What did you do to run the wire back. I am about to do an installation on my 2002 Response LX and reading the directions that is one thing that looks a little challenging.

I just ran it under the gunnel (sp?) down to the back. It's a straight pass all the way to the back and then into the engine compartment.

--Robert

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×