Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

transmission cooler question

Recommended Posts

I brought home the hose clamp that secures the raw water hose from the impeller housing to the intake side of the tranny cooler, thinking I'd replace it with a t-bolt clamp or tensioning clamp (something maybe less likely to deform the mouth of the tranny cooler if slightly over-tightened).  Should have actually measured the O.D. on the tranny cooler.  My clamp is at 1 3/4 in. in diameter when initially engaged, probably 1 1/2 in. in diameter when snugged down, but I guess I need to be more precise.

My boat is a two hour round trip drive away.  So . . . anybody either know off hand the I.D. of that hose or the O.D. of the mouth of the tranny cooler, or have ready access to their Indmar engine to take a measurement?


Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...