Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

'16 23LSV - Bow Triangle Plumbing Question


pauley71

Recommended Posts

I've searched and found multiple instances of the IXFE's and others install; however I have a question about using the drain plug.  I''m not at the lake right now so I can't check, but are folks using the center drain plug?  Does the LSV only have one bottom drain plug?  Where are folks mounting the switch?  Also, is there an easy (recommended) place to tie into 12v/ground?  

Sadly I've had everything since black friday but just now getting to install it.  I guess I needed a few spring outings with throwing the pump over the side to remind me how much I hate doing it! :)

Link to comment
On 5/31/2017 at 9:23 PM, pauley71 said:

I've searched and found multiple instances of the IXFE's and others install; however I have a question about using the drain plug.  I''m not at the lake right now so I can't check, but are folks using the center drain plug?  Does the LSV only have one bottom drain plug?  Where are folks mounting the switch?  Also, is there an easy (recommended) place to tie into 12v/ground?  

Sadly I've had everything since black friday but just now getting to install it.  I guess I needed a few spring outings with throwing the pump over the side to remind me how much I hate doing it! :)

Using the center drain plug in access hold to do what?? Or are you talking about a triangle sac drain plug opening?  is this an on cushion bow sac or the one in locker, the one in locker should have s factory pnp system with its own fill and drain pumps and lines snd a vent line, if your talking about on cushion sac , you have to plumb in an extra reversible pump and possibly vent line sharing the locker sac or center tank vent or bow tank vent or use kinetic vent , if you have a bow tank then you can, I assume, piggy back on to that for bow sac drain and maybe fill from bow tsnk fill as an overflow, to fill separate you need a new additional pump, I'm not sure  of the or your LSV setup but I think your not getting responses cause not specific ?

Edited by granddaddy55
Link to comment

Mines older but I used the front drain under the hatch next to the driver for my front reversible, haven't had any problems at all, never took the t plug out tell I plumbed it.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...