Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Twitch02x

Mux switch help

Recommended Posts

Twitch02x

I'm currently in the process of completely redoing then stereo in my 2008 VLX. When I was removing the old amp rack and all the old wires etc I took out the jbl marine black box looking thing as it was mounted to the back of the rack.

 

my problem is now when I turn the key on I have no mux switches. The gauges are on and working along with the cruise control screen. I tried plugging the black box thing back in and giving it power and ground and hot at yellow wire but still nothing.

 

Can I not remove the factory radio equipment and still use mux switches??

Share this post


Link to post
Share on other sites
wdr

When the MUX quit on me it was a low voltage issue. I would check the battery voltage and the associated connections first.

Share this post


Link to post
Share on other sites
Twitch02x

Yea wdr i think you hit the nail on the head

 

So when i got home last night all i did was reconnect the battery and they were working fine, the battery connections were slightly corroded!!

Its all good, i moved the left mux over to the right side and reprogrammed it to control all the functions i wanted and im going to put my Wetsounds EQ in the slot where the left mux was!!

Should make for a super clean install.

Share this post


Link to post
Share on other sites
wdr

Yeh, if it wasn't for the fine tune wedge adjustment being on the right MUX I would have absolutely no use for that MUX. I run all of my presets off of the MV so all we basically do is bump the wedge up or down a click with that MUX. The 420 in one of those slots would look great if it will fit???. Be sue to post pics after you get done. Bill

Share this post


Link to post
Share on other sites
Twitch02x
7 hours ago, wdr said:

Yeh, if it wasn't for the fine tune wedge adjustment being on the right MUX I would have absolutely no use for that MUX. I run all of my presets off of the MV so all we basically do is bump the wedge up or down a click with that MUX. The 420 in one of those slots would look great if it will fit???. Be sue to post pics after you get done. Bill

you can add those wedge presets to the other mux switch, thats what i did on mine!! here is how i have it set up.

PAGE 1

HORN - DASH LIGHTS - INTERIOR LIGHTS - DOCK LIGHTS - NAV/ANC LIGHTS

 

PAGE 2

HORN - MLS LEFT - MLS CENTER - MLS FRONT - MLS RIGHT

 

PAGE 3

HORN - POWER WEDGE DEPLOY - POWER WEDGE DOWN - POWER WEDGE UP - BILGE PUMP

 

PAGE 4

HORN - AUX OUTPUT - ALL OFF

Share this post


Link to post
Share on other sites
wdr

I did move some functions on mine around a few years back but don't remember seeing the wedge options on the left MUX. I will have to get in it this weekend and poke around to see if it is available on the left side. If so I will definately move it over there to a wedge specific page that is easier to see than where it is buried now on the right side. Thanks for the reminder. Bill

Share this post


Link to post
Share on other sites
Twitch02x

How do you post photos here

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...