Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Displaying depth in ACC ignition


Recommended Posts

I have a new to me '03 Sunsetter LXi (sslxi might help the search engine folks) with the standard era gauges.   We spend a fair amount of our time in lakes where due to mineral content of the water, one cannot see rocks or trees submerged 6" (never mind a few feet).   After searching and reading many different threads I have not found anyone asking or doing a write-up on displaying a depth reading from the Multi Function Display Panal of the speedometer when turning the ignition/key to the ACC position.  Has anyone attempted changing up any wiring to accomplish this?

Link to post

Wow.   I suspected that would be "the norm" and your post confirms that it should be at least possible.  Now I'm wondering if perhaps the original owner added PP and that somehow in the wiring of that project the ACC power to the MFDP was lost.

Short of adding another aftermarket gauge, does anyone have any wiring/power knowledge they would be willing to share in order to accomplish what formulaben has?

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...