Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Anyone used these racks?

Recommended Posts

I just bought the Reborn rack with the spinning attachment and quick release knob. I got the package yesterday. All the pieces look nice, and feel very solid. I have 2 gripes so far, but can't complain too much since it was on sale for $189.

Gripe 1: the glue to hold the rubber inserts in the forks is a little sloppy (residue on the metal), but won't be visible with a board in the rack

Gripe 2: the quick release knob is kinda worthless because there is a hex cap screw that also holds the plate on the mounting clamp. Looks to me like I still need an Allen wrench to take the rack off the clamp. The rack didn't come with paper instructions, and the instructions online don't show the spinning attachment... seems to me if I don't install the hex cap screw, a good jolt would allow the rack to tilt.

Link to comment

Ok, so after re reading the instructions (which probably aren't written by someone with English as a first language) and doing a closer inspection of the rack, I have to take back my #2 gripe. The tip of the quick release knob has a hex key cut into the end of it. This allows you to use the knob itself to remove the hex cap screw and remove the rack from the mount in under 30 seconds! Pretty sweet!

Edited by Chatty21VLX
Spelling is hard
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...