Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Nwextreme

Velcro on Ronix wake surf shaper-can't seem to do it!!

Recommended Posts

Nwextreme

Bought that wake surf shaper at the boat show a couple months back and now that it's prime time to surf I can't seem to bring myself to put Velcro on my boat.  Just seams so tacky..those of you who have done it is it that bad or does it blend in well.  I have a black boat so I do have that going for me...

Share this post


Link to post
Andrew63

It is only stuck on & can be removed.

Having a Black Boat with Black Velcro, should not be noticable.

I have a Navy Blue hull with the Black & while is is noticable, not enough to worry.

If I used white on the Blue, different story.

Had a go at a home made version scaling from web images

Would love to find out the dims of the real McCoy to see how far out my guess work is.

Dims of the 3 sides will be enough to work  it out

Share this post


Link to post
Nwextreme

Thanks fir the reply.  15.75x20.5x10 x12 wide. Hope that helps

Share this post


Link to post
braindamage

I went with the mission delta. Suction cups and a 30 day money back guarantee.

I don't mind diy stuff, but paying money to another company that puts Velcro on the side of my boat is just too much for me.

Share this post


Link to post
cdock100

I have a white boat..so I opted to get some white velco..you will be the only one that notices it, especially black on black . It will look better than most homemade surf gates I have seen.

Share this post


Link to post
TimbrSS

I'm all for DIY stuff, and maybe for experimenting Velcro is OK, but not for a permanent solution to anything. Get Mission Delta instead. 

Velcro, cutting boards, plywood and skate ramps just shouldn't be on a  $10k+ boat.

Edited by TimbrSS

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...