Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Fuel gauge 2000 vlx


Recommended Posts

I have the 2 1/16th inch depth and water temp gauges on both sides in the dash. Neither are visible anymore. I am about to replace one with a new depth gauge, and was wondering if it's possible to fill the other hole with a aftermarket fuel gauge and have it work with a teleflex sending unit. I ordered a new teleflex sending unit and the factory 4 gauge cluster hasn't worked since I owned the boat (just fuel). Did not know if the the gauge would be looking for a different resistance than what the teleflex unit would be sending. Sorry if this is a dumb question, just not familiar with ohm based gauges. Thanks 

Link to comment

Maybe this will help someone out in the future. The fuel senders have an ohm range. Mine was 33-240. You have to get a gauge to match that. I oredere an  Autometer. A also replace the fuel sender with a new teleflex sender to get a more accurate reading. Instructions for that are in diy. All in all this was a very easy project 

Link to comment
On May 9, 2016 at 7:15 AM, racer808 said:

I've got a 4 in 1 gauge if you need.  Pm me

Thank you, but I'm keeping it with the fuel gauge not working. I installed the autometer fuel gauge in the bottom right hole on dash, and am installing a faria depth finder on the bottom left hole. 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...