Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sub and box info Rev 10 install on G3 tower


Recommended Posts

Hi have a 2013 mxz that needs a sub box built but i hear heater cores are in the way a bit. don't mind building out towards the driver a bit to gain cubic ft any pics and info is appreciated... also just bought 4 rev 10 with rgb led setup and dual bracket. looking to pair them with a wet sounds sd2 amp once funds replenish....again speaker install and any info appreciated.

Edited by 22mxz
Link to comment

As far as the subwoofer goes, here is how I would proceed. Boats can vary within the same year and model, which is especially true in the case of heaters. I would begin by making my model of the cardboard or posterboard subwoofer enclosure. Make it the maximum size and shape that will fit the space, clear cables and vents, and accommodate the legroom that you are willing or not willing to give up. You can also verify the ease of insertion/removal. From there you have a maximum external displacement which easily converts into a gross internal displacement. From there you have the concise data needed to select a subwoofer size, the best type of loading (whether sealed or bass-reflex), and the subwoofer with the parameters that best match that enclosure. Downsizing the model a bit for whatever final enclosure design you choose is a walk in the park.      


Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...