Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Maliview Button Lights stay on 2010 LSV

Recommended Posts

Noticed today that the lights on the maliview buttons are not going off. I'm pretty sure the had in the past? I pressed the All off on MUX and both MUX turned off but the button lights stayed on as well as the pointers on the tach and speedo.. Are they time delayed or ?


Link to comment

My Malivue is slaved to the key in the run position. Unless the key is in run position the Malivue is off and it is independent of the MUX switches which stay on for 30 minutes after key off according to the owners manual. You have rewired anything lately?

Link to comment

Nothing rewired. In fact I don't think it was a problem prior to this last weekend . The Display isn't on , Just the button lights as well as the gauge needle. Spoke with Malibu tech today and hadn't heard of this one.

Link to comment

We have the rubber push buttons on the sides of the screen on the '10s, at least on mine it is an April boat. There are 3 plug ins for that screen. Left and right connect to the screen behind their respective button columns, the blue cable is center mass from the Viper box and a 4th cable which I assume is for the GPS is just laying loose behind the dash. Not really anything to go wrong behind there to cause the problems seen. Almost forgot the plug ins for the speedo and tach are back there as well.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...