Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Badger

Can I dim the interior lights and separate the Wakesetter backlighting?

Recommended Posts

Badger

I previously posted this question towards the end of lengthy thread when I bought my boat, but didn't get any answers. I'm trying again in a new thread.

Is there a way to dim the interior lights on the VTX or will that require a mod of some sort? I've searched and don't see that answer more recently than 2007. The interior white lights are overpowering. I just want to be able to see the cupholders.

Also, can I separate the backlighting of the Wakesetter logo from the rest of the interior lights, so it could be on without the rest of the lights?

I'm also looking to change the color to blue to match the boat on both the interior and the back lighting of the Wakesetter logo. I'm pretty sure I can swap out the lights with LEDs, but not sure how to get at the back of that logo. Where do I start disassembling the boat to get at it?

Edited by Badger

Share this post


Link to post
Badger

Holy manual, Batman! I actually broke out the manual and figured out where the settings are in the MTC. I'm headed out to try and adjust the dimmer setting on the interior lights.

The other questions are still valid. Can I separate the backlighting on the Wakesetter logo and how do I get at the light if I want to change the color?

Share this post


Link to post
ahopkinsVTX

Yes you could separate the WS logo from the others. It would most likely require running new wiring to a switch under the throttle or something. Wouldn't be that bad though.

I changed the colors out and it was easy, I bought LED strip lighting that can be cut every 3 LEDs and new leads can be soldered on. My Malibu emblems just screwed off and there was red LED in there already.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...