Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Crankcase Breather


Recommended Posts

The crankcase breather on my engine ('00 Monsoon) is basically just a 1/2" rubber hose connecting the valve cover to the flame arrester. No baffles at all. After about 20 hours use, the bottom of the flame arrester would be covered in a film of oil. I never liked this, the oil could then run down, cover the throttle body, then on to the rest of the engine. I got tired of wiping it off, so I ended up installing one of the in the hose (angled down so the captured oil would run back to the valve cover). It stopped at least 95% of the oil vapor. (Chrysler part number 53030850AB)


Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...