Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
kayakwv

Wetsounds 420 Microphone, where do you clip it?

Recommended Posts

kayakwv

Getting a 420 BT installed today. The microphone has a spring clip on it. For those that have the 420, what do you usually clip the Mic to?

Thanks.

Share this post


Link to post
wdr

I have some thin stainless sheet that I bent and rolled into a bracket which I attached to the back side of the walk through (right below the 420 left of the steering wheel) using the existing panel screw that holds the walk through panel to the fiberglass. I made the bracket tall enough that the spring clips lip doesn't extend past the end of the bracket so I don't have to fight to get it off. Merely push it open to slide it on.

Share this post


Link to post
shawndoggy

Share this post


Link to post
baadls1

Shawn, you can't tease us with that without sharing a link from where you got it!

Share this post


Link to post
baadls1

Looks like searching for "Microphone hanger button" or variations thereof will yield some results. Do you just re-use the existing set screw for the old clip?

Definitely doing this on my Sanger.

Share this post


Link to post
shawndoggy

I had to drill a hole in the back for the button. If you are lucky you can get the part at your local truckstop. I tried but they did not have the button so I ordered that on eBay.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...