Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Tom Sawyer

Rlxi Cooler Won't Drain

Recommended Posts

Tom Sawyer

Water has been standing in there for a couple of days now. I took a wire close hanger and pushed it through the hole....doesn't seem to be obstructed by anything. Not a lot of room to maneuver with the closed cooling to take out the panel in the bilge between the motor box and cooler, so I hoping to avoid doing that.

Any ideas?

Edit - Yes I have the bow jacked up plenty high.

Edited by Tom Sawyer

Share this post


Link to post
Share on other sites
edwin

on my RLXi the drain isn't at the low point of the cooler. I shopvac the water from the ski locker and cooler before vac'ing the boat

Share this post


Link to post
Share on other sites
jshap

Mine does the same thing. I had water in there for a long time until I sucked it out with a vaccuum. Unless the bow is up, the water just sits in there. On my boat anyway, there needs to be a pretty good angle to the boat to get the water to drain out.

IMHO, the drain needs to be in the center of the floor and not 1/2 inch up the sidewall. Just not a good design for proper drainage.

Edited by jshap

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...