Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Charger Install

Recommended Posts

I just ordered a pro mariner charger to install in my boat.

For those with a permanent install, how have you installed this?

My boat has a small storage "pocket" in the walk thru, that is plastic. I was thinking about mounting to the backside of that using bolts and locknuts. It would be inside the storage area and just above the batteries.


Edited by Soon2BV
Link to comment

did you use the super / industrial velcro?

Xtreme velcro and rested it on the floor against the left side. Been out a few times and took some big rollers while underway and it didn't budge.

Link to comment

Im going to install mine in that compartment on the wall facing forward to the right on the amp board. You want to screw or bolt it no velcrow or adhesive will hold when you hammering back through 3 foot waves. It'll be sitting on top of batteries......

Link to comment

I used screws.

From the inside where the plastic pocket goes thru wall you can feel how thick wall is. It seems to be 1" thick.



Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...