Running Speaker wire in a Illusion tower

[Dave K]

2006 VLX with Illusion Tower

I have been doing the search thing and can't seem to find info.

Is there a link to a previous post or can someone help me with providing some information on how to run speaker wire from the boat through the tower to a pair of rev 10's?

Thkx

[wake1923]

Just let your tower down and there are holes for your other wiring to run the wires through i just left a little slack for lowering the tower.Use a small wire to feed your stereo wire up the tower to the holes for your speakers.

[REHinH20]

We used a wire fishing tool.

[DQ]

You could try a cotton ball with fishing string wrapped to it and use a vacuum to suck it up to where you need it. Or go old school and use a fish.

[Dave K]

I tipped the tower forward and the port speaker wire comes down the port side and the starboard tower speaker wire comes down the starboard side.

When you say fish it down with a wire fish, do you mean down the port side for the starboard tower speaker so both wires are port side close to the amps?

Also what is the easiest way to get all the RCA and other power wires etc from the starboard helm to the port side helm?

Thks

[Bradley Thornton]

Use fish tool like $10 at Lowes. As for wireing tower with the tool you can wire it now you want just fish it. Now for RCAs look at your battery power cables you will see a hole in the floor that goes from starboard to port again just fish it.