'06 23LSV Drivers side kick plate removal

[LUV2SKI]

I have a 2006 23LSV that I'm having a hard time removing the kickboard panel so I can run the wires for my new sub. My 2005 sunsetter had 3 stainless steel screws (buried in the carpet) in the base of the kickboard. Please help me remove this board.

[JAXONBOATS]

Same as your Sunsetter , 2 or 3 SS screws in the base and 1 on the right hand side on top of the rail, sometimes they add another one on the right hand side

at the base About 1/2" up equally spaced, I use a feeler gauge to find them or a sharp poke tool to find them by looking in the treads of the carpet. They are usually lower than you think because of the angle of the kick board

[LUV2SKI]

Jax, Thanks

I thought this would also help someone out. Was trying to remove the drivers kick plate (kick panel, kick board, sub board, floor board etc.) to run wires for my new sub. To remove this was a pain in the a_ _ ! It took me over an hour to find the 4 stainless screws. I ended up sliding a putty knife along the base of the board until I found the screws. The top right screw was actually buried under the carpet, making it more challenging to find. Hope these pics help.