Rev10 location and source

[TexasWakeRep]

Looking for input from those of you with G3 Towers that have REV10s mounted in the upper location and also if you have the slider bimini:

Spoke with Wetsounds today, they say:

I need the Dual G3 Tower Adapter to mount in upper location.

Swivel clamp will allow me to swivel up and down

I must perform the slider bimini modification here: http://www.wetsounds.com/media/products/manuals/Malibu-G3-Dual-Bracket-Slider-Bimini-Pole-Modification-Guide.pdf

I'm interested in the upper mounting location.....less chance of knocking myself out and gets them more out of the cabin. I'm interested in the swivel clamp so I can aim the speakers upwards..direct the music more towards the rider and less towards rear seat passengers.

Does anybody have Rev10s on swivels in upper location with slider bimini? What has your experience been?

And last, what have you guys found to be the best/cheapest source for Wetsounds products?

[dDubya]

I ran into a similar problem when mounting my REV10s on the single x mount bracket. I'm not particularly fond of the way 1 pair of speakers looks on the dual bracket. With the speakers mounted in the "single bracket" location, the lower bimini accon was obstructed. My simple and super clean fix was to drill and tap my upper fixed board mounts for the accon. Now the bimini works perfect with the speakers in place, and the stainless accon is almost invisible mounted on the polished board rack...

[dDubya]

...and definitely go to Earmark Marine for your Wetsounds gear. David and Odin are supremely helpful and offer VERY competitive pricing.

Edited April 25, 2013 by dDubya