About to fire up the system for the first time

[Mjlee1985]

Where should I start as far as the Zld goes? Start every knob at the lowest and work up? Running hu, Zld, harpoon, exile 800x4 and a mtx 4 channel on the 2 channel setting for a l7 kicker sub. All I have left is put battery in and connect rca's to Zld but I have never tuned a stereo before so any help would be great. Followed the instruction diagram from exile as far as amp setting? But not sure on any of it!? Help

[Mjlee1985]

Never mind cleared it up with Brian at exile.

[wakedncsu]

What did he tell you?

[Mjlee1985]

Set main source(headunit) at 3/4 volume.Pull all rca's out of Zld, and reattach one zone. He said he usually starts with cabin. Set gain all the way down and work up to speakers distort then back off slightly. Set Zld so all knobs are at 12 o'clock and play with them til it sounds good. Repeat all steps for each zone! Ill let you know how it turns out

[Mjlee1985]

Turned out awesome! Thanks exile audio, great customer service and amazing speakers. The xm9's are amazing. This was a bigger project then I thought but it payed off. Theses things are loud and clear. My first system I have ever installed and was pretty straight forward. Thanks to the crew and Brian at exile all ?'s were answered before I messed something up. Can't wait to get behind the boat in the water to see how they sound.