where to buy replacement cans?

[jesseray6537]

i have the illusion X tower. i bought the kicker 6500.2 speakers and they want fit in my cans. where can i get some longer cans? the set up i bought has the 2 speakers and 2 horns. the horns are to long by a half inch and the speakers want even fit in the cans due to the brackets on the inside. the speakers are 6.5. Thanks for any help!!!

[wakesetter8796]

http://www.kicker.com/KM_Tower_Speaker_Empty_Enclosures

Think these will work....

[wakesetter8796]

Possibly, if that doesn't work, maybe some Titan Alpha 1 cans will.

[UWSkier]

Surprised nobody has recommended the local plastic surgeons office yet...

[Murphy8166]

That is just what i was thinking!!!!!!!

[Earmark Marine]

It's funny that you would mention that because just yesterday there was a plastic surgeon in my gym passing out Two For One coupons.

[Murphy8166]

badump bump ching!!!!!!!!!

[MLA]

Pull the cross-over off the back of the horn and glue/tie it to the side of the horn. Remove what ever bracket is on the inside of the can, although im not sure what is in there that could prevent the KM6500 from fitting in. They are not deep and do not have a traditional magnet.

[t a]

I have the same boat and speakers, do you have the metcraft cans? my horns did not fit but i had to cut a small amount away from the lip of the can, it wasn't a depth issue, the metcraft cans are plenty deep...

EDIT: Take a jigsaw or something and cut the hole larger, very easy to do

Edited July 2, 2012 by t a

[Dave K]

DIY Wake

[Dave K]

I did have to take a jig saw and enlarge hole a bit but these where certainly long enough

[jesseray6537]

i had to make a spacer so the horns would fit, not sure if i have the stock cans since i bounght the boat used earlier this year. and the 6.5 speakers would go all the way in the cans due to the brackes on the inside of the cans. so i made two more spacers. people said they wouldnt sound that good out of the cans while wakeboarding. but they sounds real good and clear! im happy with the kickers and the price LOL!!!

[lyndon23lsv]

Hey I was looking at using this system to put into my factory cans on my 07 23 LSV. My cans are the bullet shaped ones, and i am concerned that the horns may be to long. Which cans do you guys have ? Any pics of this system in your cans ? Thanks for the help.