Machined screws for metal Malibu emblems

[holdpoint]

Need to re-install a couple of the metal badges on the interier but I would like to use an aluminum machined screw to do so to match the emblem. Contacted Malibu with no response. Any idea where I could grab these specialized screws?

[Soon2BV]

Need to re-install a couple of the metal badges on the interier but I would like to use an aluminum machined screw to do so to match the emblem. Contacted Malibu with no response. Any idea where I could grab these specialized screws?

Check McMaster-Carr.

[khelfrich]

you could probably order a box of them from mcmaster carr

[martinarcher]

I would guess the emblems are stainless? Hardware store should carry stainless machine screws.

[pielet97]

All new emblems are stainless, so if you use stainless/stainless combo, make sure you use antisieze or they AIN'T coming out, ever. That is unless you break the screw.