Table pedestal

[l98ycar]

My new to me 2000 Escape 23 LSV came with the rear table but missing the pedestal, can someone measure theirs and let me know how long it is and if it is aluminum or stainless? It looks like it should be a 2 inch diameter.

Thanks

[Hammertime]

My new to me 2000 Escape 23 LSV came with the rear table but missing the pedestal, can someone measure theirs and let me know how long it is and if it is aluminum or stainless? It looks like it should be a 2 inch diameter.

Thanks

Congrats on the new boat.

We got everything but the table in our '03 23 LSV.

Assuming it's the same, I can measure it for you if no one else chimes in.

Our boat is in storage, but I can get to it this weekend.

You should be able to pick one up at an RV store.

Make it a great day.

[Beau]

Somewhere there's a deserted island where all the OEM table pedestals must go. In '05 when I bought my 2000 it had a table and no pedestal (Imagine that). I was able to get one thru a nearby dealer. BTW, that tube makes a great hard storage tube for a large umbrella.

[boatswaiyn]

Somewhere there's a deserted island where all the OEM table pedestals must go. In '05 when I bought my 2000 it had a table and no pedestal (Imagine that). I was able to get one thru a nearby dealer. BTW, that tube makes a great hard storage tube for a large umbrella.

Mine must on that same island, because When I bought our boat it came with the table but no leg. How much does one of those pedestals cost?

[Soon2BV]

Mine is 26.5" long.

Bottom and top are 1.78" diameter, center area is 1.88" diameter. It is a slow taper towards the ends.

It is brushed aluminum.

So, I would say something about 1.8" OD and then polish down the ends to get a snug fit into the floor and the tabletop.

[Pistol Pete]

My link