Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Texasguy

VLX Throttle Linkage Adj

Recommended Posts

Texasguy

I've got a question here, my throttle begins to advance before the gear shift is engaged. There is perfect pass installed and seems to work just fine, the engine is the Monsoon MPI.

How do I adjust the linkage to solve this so the gear is engaged at idle rpm. The end of the throttle cable at the Morse control is set about in the middle of the threads. The carb end is connected to the PP wire.

Any advice would be appreciated.

Bryan

Share this post


Link to post
Share on other sites
NorCaliBu

Could be slack / slop in your shift cable connections.

I'd check that first before messing with the throttle cable because of its interface with PP.

Edited by NorCaliBu

Share this post


Link to post
Share on other sites
Pistol Pete

Mike has good advice.

Share this post


Link to post
Share on other sites
NorCaliBu

:blush: Aww, shucks. :blush:

Biggrin.gif

Share this post


Link to post
Share on other sites
actionadd

Check the Cable for the PP.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...