Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Power Wedge Problem 07 V-ride


BlondeAmbition

Recommended Posts

I have been trying to trouble shoot my power wedge for a little while now and have not come across any solution. It has been stuck in the up possition.. I have tried attaching a different power to the switch, tried to look at "calibrating" the wedge but wasnt sure how to do this since the only options are PW presen and PW N/A... Is there a hidden inline fuse or fuse block? Where is the hydraulic pump located for the wedge? Has anyone had a similar problem and been able to fix it? Any help to solve this would be greatly appreciated!

Link to comment
Malibudude

Yes there is a 30AMP fuse that controls the rams for the PW, check this earlier post I made illustrating where it's located. Does it even try to move? Verify that each ram is sealed, there is a weak area where the acrylic can break. This is a rare problem as I did have to replace one of mine due to this, but I could clearly see the problem.

Link to comment

thanks for the advice. i check everywhere for that fuse, but it was no where to be found... Is there anywhere to get a replacement fuse like that?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...