Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Intense

Removing dash

Recommended Posts

Intense

Hey all,

I'll be attempting to replace a gauge in the near future and was wondering how I get the dash panel out to replace the gauge. There don't seem to be any obvious screw holding it in, except the two screws holding the Malibu emblem.

Thanks

mike

Share this post


Link to post
areamike
Hey all,

I'll be attempting to replace a gauge in the near future and was wondering how I get the dash panel out to replace the gauge. There don't seem to be any obvious screw holding it in, except the two screws holding the Malibu emblem.

Thanks

mike

You don't have any screws on the top? And then a couple underneath? I'm not sure how much different your dash is than my cousin's 2001 Sunsetter LXI.

Share this post


Link to post
wienrdog

Found a picture of a '04 dash. Should be those 2 screws in the emblem & one directly above the speedo, then the entire black gauge cluster will come out of dash.

Share this post


Link to post
liljohn

Remove the emblem and there is one screw behind it. then look up and there is one screw in the middle going up. the dash should come out easy enough!

Share this post


Link to post
Intense
Found a picture of a '04 dash. Should be those 2 screws in the emblem & one directly above the speedo, then the entire black gauge cluster will come out of dash.
Remove the emblem and there is one screw behind it. then look up and there is one screw in the middle going up. the dash should come out easy enough!

Huh, I guess I've never noticed that screw above the speedo. i'll have to look at that again.

I just hope the PP computer is mounted in an obvious spot...too

Share this post


Link to post
MN_LSV
Found a picture of a '04 dash. Should be those 2 screws in the emblem & one directly above the speedo, then the entire black gauge cluster will come out of dash.
Remove the emblem and there is one screw behind it. then look up and there is one screw in the middle going up. the dash should come out easy enough!

Huh, I guess I've never noticed that screw above the speedo. i'll have to look at that again.

I just hope the PP computer is mounted in an obvious spot...too

Just recieved notification the package arrived.

Our computer module was under the dash on the walkthru wall. Dash screws as described by liljohn.

Hope it's an easy install and everythings compatible!!

Edited by MN_LSV

Share this post


Link to post
Intense

Yep, got it! Thanks! We'll find out in a couple hours. Guess I'll bring an assortment of screwdrivers, utility knife, zip ties, and a small socket set to the boat.....besides the gauges and controller, of course.

Found a picture of a '04 dash. Should be those 2 screws in the emblem & one directly above the speedo, then the entire black gauge cluster will come out of dash.
Remove the emblem and there is one screw behind it. then look up and there is one screw in the middle going up. the dash should come out easy enough!

Huh, I guess I've never noticed that screw above the speedo. i'll have to look at that again.

I just hope the PP computer is mounted in an obvious spot...too

Just recieved notification the package arrived.

Our computer module was under the dash on the walkthru wall. Dash screws as described by liljohn.

Hope it's an easy install and everythings compatible!!

Share this post


Link to post
areamike
Yep, got it! Thanks! We'll find out in a couple hours. Guess I'll bring an assortment of screwdrivers, utility knife, zip ties, and a small socket set to the boat.....besides the gauges and controller, of course.

and a few beers! Beer.gif

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...