'08 VLX - Will a Shorestation 45120 accomodate?

[datsniferus]

I just purchased an '08 VLX and was in the process of trying to buy a used lift over the internet. Does anyone know this model (Shore Station 45120)will work? I wish I could find an online picture of the lift, but I can't locate one?? My main concern is the way the bottom is configured and whether or not the fins and the Vdrive will fit properly.

[Sixball]

I am not very familiar with Shore Station but I will bet it is a 4,500lb lift with 120v power. Ok now most lifts do not come standard with hi bunks for boats with tracking fins. Not that bad most can be changed not to costly and easy to do on most lifts. Shore Station has a good rep.

[edgeski1]

is the cradle flat, or does it have a slight Vee to it?

if flat- no

if vee'd- yes

[stevej028]

I think that is the 4500 pound lift with a 120 inch beam. This lift will accommodate your boat, the bunks will just have to be adjusted all the up to give the fins clearance, and the hoist can be lowered deeper into the water. I have the 4000 pound model, if you have any questions you can pm me.