Evolution Cover

[martinarcher]

Big heavy duty zippers that allow the cover to be easily installed over the tower legs. Cory uses your measurements for the tower leg locations to make boots with elastic to handle the tower leg sealing. There is also a zipper running horizontally along the tension rope that allows easy access to the stainless clip so the rope can be separated for installation over the tower leg.

Felt sewn into the cover to protect the bottom side form the pylon and windshield...

I asked Cory to add a bright color to the underside of the nose so I could easily find it when the cover is all folded up. Pretty cool!

[Baddog]

It's your fault I am going to have to spend that kind of money. YOU tell my CFO.

[Ndawg12]

I asked Cory to add a bright color to the underside of the nose so I could easily find it when the cover is all folded up. Pretty cool!

So simple but a brilliant idea, why didn't I think of that, I hate trying to find the nose after someone wads it up like a big dirty napkin!!!

Damn MA you've been busy, I like the addition to the tower, but it's missing something!!!

Edited September 11, 2009 by nemire12

[martinarcher]

It's your fault I am going to have to spend that kind of money. YOU tell my CFO.

No worries - it's money well spent! As far as the CFO - that's your job! All I can say is, I hope she's as cooperative as mine.

[martinarcher]

I asked Cory to add a bright color to the underside of the nose so I could easily find it when the cover is all folded up. Pretty cool!

So simple but a brilliant idea, why didn't I think of that, I hate trying to find the nose after someone wads it up like a big dirty napkin!!!

Damn MA you've been busy, I like the addition to the tower, but it's missing something!!!

I know it. My last piece of crap cover was all grey and a total pain in the butt when it came to finding the nose!

Yep - it was a good busy night with the boat. Got you mirror arm today with the cover! No worries the CIPA Extreme mirror is on the way.

Edited September 11, 2009 by martinarcher

[WakeGirl]

Nice addition MA. You'll get a lot of use out of it. Cory continues to do great work.

[MalibuTime]

Very cool. If you can, you should run the outer two rear adjustable straps over the perimeter rope, not under. That (at least on the VTX) gets you a more snug fit under the rub rail.

[Baddog]

How many of those hook thingies are there attached to the rail?

[martinarcher]

Very cool. If you can, you should run the outer two rear adjustable straps over the perimeter rope, not under. That (at least on the VTX) gets you a more snug fit under the rub rail.

I was debating which way to do them (on top or under like I did). I'll give it a try on top next time. Thanks for the tip!

[martinarcher]

How many of those hook thingies are there attached to the rail?

8 total. 4 on each side. They work really well to get the cover in place before you cinch down the perimeter rope.