Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Adding ballast to rider presets?


Recommended Posts

I posted this elsewhere but thought I start it over here where it belongs.

If you were to plumb in extra ballast on an '08 or '09, are you able to somehow tie it into the rider presets? Or would it have to be a separate manual switch?

Link to comment

It depends on how you setup the system. But if your additional ballast is just an overflow for the stock tank (most common and easiest), you can't tie it into presets because those use the floats in the ballast tanks to know when to turn off.

But you can use the manual fill and drain switches on the dash to continue filling the additional ballast once the preset has turned off the pump.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...