Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Accessory switch for 1989 Malibu skier


Recommended Posts

One of the push/pull accessory switches on my 1989 Malibu Skier stopped working. I can't find any current ones for sale that will fit--they're all too wide. Any suggestions on where I can find a replacement switch that exactly matches or will at least fit? I believe the diameter of the post is technically 19/64ths of an inch; so, essentially 5/16ths of an inch. Thanks.

Link to comment

1) If not a marine store, check an auto parts store. I've seen lots of the same or similar.

2) If the new ones look pretty much the same but require a bigger hole -- just drill a bigger hole. You could still use the knob off your bad one to match the others.

3) As a last resort, I had a similar boat but replaced my switches with rockers. I don't remember if I kept the old push/pull switches, but I'll look for you. All worked fine.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...