Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
smithy81

310 indmar

Recommended Posts

smithy81

The dipstick tube on my 310 indmar has rusted thru where the tube passes behind the manifolds. The manifolds have started to corrode on the outside causing the tube to do the same where it has been touching/ rubbing. Has anyone had to replace this tube and is it just a off the shelf 350 chev dipstick or it is it a specialist part :unsure::unsure:

Share this post


Link to post
MalibuTime
The dipstick tube on my 310 indmar has rusted thru where the tube passes behind the manifolds. The manifolds have started to corrode on the outside causing the tube to do the same where it has been touching/ rubbing. Has anyone had to replace this tube and is it just a off the shelf 350 chev dipstick or it is it a specialist part :unsure::unsure:

You could measure the length and compare. Seems the diameter would be the same unless they actually machined the block differently, which doesn't seem too likely for a dipstick.

Share this post


Link to post
Woodski

Length is what is important, when replacing make sure replacement is the same.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...