Welcome to TheMalibuCrew!
As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!
-
Recent Posts
-
IXFE 14,188
You guys quoting the CFO resignation as anyway part of this are simply grasping at straws. You have less than ZERO knowledge on this topic. If you knew the timing and the reasons he left you’d feel pretty dumb. That’s all I’m gonna say about this.
As for Jack… resignation is an interesting word for his departure. You believe what you want.
-
Judders 1
As we’ll note the auto bilge hot powered of the battery will not run, when the screen and gauges have gotten power it worked, boat would crank and start and then died again idling and back to the same. Had to pull it out to a hill to drain the hull from rain. Batteries are also brand new and setting at 12.5 volts
-
Judders 1
Lost all power and gauges while running the boat, post winter and I run it once a month all winter in socal. Was idling, rpms dropped and lost all power and gauges. Power restored and happened again. only gotten power once back since
Aux setting on the ign power runs radio no issue, back to main ign setting nothing other then radio has power lbut it won’t play and no gauges or screens. Been chasing This down a few weeks before it goes in and any advice will help.
2017 axis t23
all relays have good continuity. Ignition key unit was replaced post the issue after finding only 3v there. This is where it’s weird the ign key gets 12+ volts to the power coming to the ignition when in aux mode, only 3.3v when in main power across all 4 connections to the ign key. Same new and old ign. 4 pin connector has 12+v when checked. Have had the gauges get power and then shut off again a few times before and after replacing the ign once this started. Kill switch and throttle already checked kill switch is only getting same volts as the ign key
to my understanding the surfgate screen is the main brain for my boat I’ve pulled it and disconnected and same voltage issue at the ign key. Ittl go to the dealer but they always walked me through all I’ve checked with a multimeter and are also perplexed.
any ideas or anyone have the same issue past?
-
afcase 1
Mastercraft seems to be in a similar market position. Clearly market wide trouble bases on the March 8 earnings report for MC. .
MASTERCRAFT BOAT HOLDINGS, INC. REPORTS RESULTS FOR FISCAL 2024 THIRD QUARTEROverview:
Net sales for the third quarter were $95.7 million, down 42.6% from the prior-year period
Net income from continuing operations was $3.8 million, or $0.23per diluted share
Diluted Adjusted Net Income per share, a non-GAAP measure, was $0.37, down 72.8% from the prior-year period
Adjusted EBITDA, a non-GAAP measure, was $9.7 million, down 70.7% from the prior-year period
Share repurchases of $1.6 millionduring the quarter
Ended the quarter with cash and investments of $105.7 million, and total debt of $50.4 million
-
ahopkins22LSV 13,594
Awesome work man. Love watching this forum convince someone to take a bit of a gamble going outside their comfort zone and making it happen!
- justgary
- 1
-
-
Who's Online 22 Members, 0 Anonymous, 284 Guests (See full list)
- oldjeep
- 32off
- DAI
- anutami
- NorCalSurfer
- justgary
- Pnwrider
- Horns1
- Stevo
- Judders
- Txstoj
- pauley71
- RyanB
- ahopkins22LSV
- belmont
- jdk
- dshack
- cwiley3
- asnowman
- OffTheClock
- IXFE
- roeboat
-
Member Statistics
42,374
Total Members8,865
Most OnlineNewest Member
AlexH
Joined