Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

  • Who's Online   55 Members, 1 Anonymous, 369 Guests (See full list)

    • Eagleboy99
    • Reevman
    • Jlarsen79
    • JLT3
    • Belse
    • IXFE
    • UWSkier
    • Lptexastornado1
    • Superdice7
    • ronimal69
    • Skicolorado
    • Hemmy
    • BearCreekBum
    • kdspindl
    • pauley71
    • Mv4ever16
    • NWBU
    • rg11
    • BlindSquirrel
    • Adam247
    • skier88
    • Skyski1986
    • bkbvride
    • Eirewake
    • CraigSim
    • Ronnie
    • birdboatboy
    • WillSki
    • ShastaDoc
    • Timmay
    • SOcalSurfer
    • ROFF
    • Carr5
    • Moondawg101
    • MystiikVLX
    • Textech96
    • lonestar
    • BlacknBu
    • csleaver
    • MalibuBas
    • Anderson24
    • txmxer
    • InIt4theDough
    • hunter77ah
    • Chad1971
    • Kojak
    • ChuckW
    • Broghammer
    • OLDGUY
    • ScottinOk
    • kkaiser37
    • KokaneeKonsumer
    • bogusjones
    • wakebrd1787

  • General Statistics

    Total Topics
    Total Posts
    Total Members
    Most Online
    Newest Member
    Joined 07/05/2020 01:10 PM
  • Latest Classifieds

  • Recent Status Updates

    • Sudaro

      Sudaro  »  kerpluxal

      Hi - Back in 2015 you mentioned that you had cad drawings of the manual wedge and legs - I have been getting the legs on my ‘99 Response ‘unbent’ but I don’t know the correct angle - would you still have the drawings and could I get a copy from you? Many thanks. Peter.
      · 8 replies
    • Brose

      Brose  »  jrvs23

      I have a powder coating guy nearby but i am hesitant to remove the trim to have it done. I don't know the condition of the rubber gasket under the trim.
      · 0 replies
    • GlennT

      GlennT  »  ahopkinsVTX

      I hope you or someone can help with a barefoot boom question ...
      We had a Dlx Universal Contour Boom from Barefoot Int'l on our "92 Sunsetter.  We just got a 2010 VTX and I'm wondering if I can use this boom I have if I get the appropriate boom clamp for our VTX?  Or will I need to get a whole new boom?  Except for the boom clamp our old boom looks like it is the same as what Barefoot Int'l  now recommends for V-drive boats.  Thanks!
      · 2 replies
    • Brucie

      Brucie  »  spikew919

      Hello -- I know it was an older post, but I saw that you wired-in a rocker switch under your throttle and near your kill switch in order to separately power up your stereo system.  I have a 2013 VLX and want to do the same.  Looks like locating the correct white/blue wire could be a bit of a challenge unless you have any suggestions on locating the right one?  Also, did you tap into a constant powered wire near the fuse panel and do you recall which one?  Thanks much.
      · 0 replies
    • rossmhill


      I have a '93 Echelon (I know she's an old girl but still loves to go) and was wondering if anyone knows if there's a full shop manual available for them (with full wiring diagrams etc).  I do a lot of the maintenance on them myself but based on the incompetent shops that I have taken it to over the years, would like to do everything myself.  Thanks in advance!
      · 0 replies
  • Recent Topics

  • Latest Images

  • Create New...