I wish the OEM GPS puck was that cheap.....

Sorry, I'm no help.   

2 hours ago, Slayer said:

I tried several zip codes in my region and received the same message.

 

2 hours ago, Hemmy said:

Tommy's probably wasn't your local dealer which is why you are locating one.

Don't shoot the messenger, was just saying if I put my state in I got nothing.   I put my ZIP in and it worked.  I checked other ZIPs and got dealers.   Whether or not Tommy's was a dealer in those ZIPs, I have no idea.    

I have noticed that my navionics will almost always glitch out when I switch between it and other screens (ballast/lights/stereo/etc).  If I really want it to work, I cycle power, then go to the nav screen as soon as it fires up.  It will work flawlessly until I switch off of it.  Many of us have switched to using our phones/ipads and navionics app vs depending on the screens to function. If you are close to your dealer, perhaps let them dig into it.  It could be a software or firmware issue.  It’s not an often utilized feature so I could see it being a low priority for the Malibu/viper/medallion programmers.  I have a brand new oem screen on mine too.  I bought the navionics to decrease the pain of buying a new screen, at least id be upgrading its capability in the process - instead just got more doubt over the quality of oem stuff that is not returnable 🤣.

1 hour ago, chill8888 said:

Thanks for all the tips guys.

I ALSO WANNA ADD THAT MY STARTER HAS BEEN SLUGGISH TO START THE BOAT LAST FEW TIMES OUT, SOMETIMES IT WOULD SPIN OVER QUICKLY AND SOMETIEMES IT WOULD BARELY START THE BOAT. 

Good clue.  Get the starter rebuilt.  Keep telling the alternator shop that it goes in a boat.  Check the batteries as well.

Hey all Ive got the 2019 25 LSV and added GPS via this antenna off Amazon :

https://www.amazon.com/Waterproof-Active-Antenna-28dB-3-5VDC/dp/B00LXRQY9A/ref=sr_1_1?crid=29DC3RJLFWXXX&dib=eyJ2IjoiMSJ9.G5vqAFzjK4LvGM17JIlc-g.2GnT84CL9HSh370u_0tYh_IiK0fk154GZRn169rYHew&dib_tag=se&keywords=Q1060+GPS&qid=1715103362&sprefix=q1060+gps%2Caps%2C128&sr=8-1

And used the Navionics SD card updated to the current map. 

It works sorta well, but every few times using it the GPS will show the boat in the center of Montana somewhere. When it does this i cant get it to reset. Even shutting off the boat entirely, waiting a few minutes, turning it all back on (Im talking shutting off battery switch and all) does NOT clear it. It will show the boat in the middle of the US.  Eventually, it clears up and starts working again.

This is obviously something I want to resolve before the next time Im navigating lake lanier in the pitch dark. 

Do you think its the s***ty $10 amazon GPS antenna ? Its mounted with clear view to the sky... Is there a better GPS antenna to get?  They are all made in china $10 s*** on Amazon, there doesnt seem to be any better unless you get a giant puck or shark fin for hundreds $$.. 

Anyone else having this issue ?