Here is what Knoxville sent me on a 2024 LSV23. 

MXZ has more water blow over the front/side into cockpit than the LSV On windy days when you are at cruise speeds. The big flat aircraft carrier front hull surface seems to push the water spray out and up, if it's windy it blows in boat more than a traditional bow.

You should never tow a tube from the tower.....tower's are for wakeboarding.   

14 hours ago, Seattle12 said:

what makes it look good? 

Basically you want consistency across the cylinders, and that everything is above a minimum spec.    Think of it as the health of each cylinder's sealing capability.    If you can't compress the air and fuel, you get less boom.   You don't want to see one or a few cylinders with really low results compared to the others, as obviously those lower numbers mean sealing has been compromised to some degree.   The engine will still run with low numbers, but you have less efficient combustion, lots of blow by, higher oil consumption, oil dilution, etc.   Minumum 125 and this engine's lowest cylinder is 190, you're good to go!   

6 hours ago, athingisathing said:

Hum confusing for sure. The gray ones i got  from amazon where correct for many of the gray dongles on my harness the black ones as noted needed to be different and the b is for thermal interlock and water rating the key is black for those differences from what I read in the industry docs... but I could be wrong.
 

the only reason I am point out the confusion is I ordered dt04-pb and got black non b keyed "" connectors... From what I can tell the style **** dictates the inener lock out groves or other mods and a b keyed item is a style of black keyed connector.... type of key can very in the style, as I said I actually bought b  that came with the wrong lock out groves location and had to re order pb with a new sub style.

This link will get you to the b "" keyed in the Same key as the one on the stereo harness you will need two 8 and two 12

https://www.customconnectorkits.com/products/dt04-12pb?variant=45536276382014

 

Thanks again for the clarity and help. Not sure why some b have groves in one location and others have what people call b keyed and have as noted the location needed for our black connectors. 

I recommend to order thru TTI, as you can type the part number straight in, and you get what you need. I have ordered hundreds of DT0X-XX-PB parts and they have always been correct.