Welcome to TheMalibuCrew!
As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!
-
Recent Posts
-
derekt2 0
Success! Mostly. Prop is off - did some pb blaster and repositioned the puller and pounded on the key with a hammer and punch from stern to bow direction like you all suggested. Didn't end up needing the heat.
The key is now stuck to the shaft.....banged on it from a few directions but it looks pretty rusty. I soaked it in wd40 and will try again tomorrow.
@Bozboat the 4 blade was a acme 579, not sure why it was on there, but I'm excited to try my new acme 525!
-
SkiPablo 163
Would suggest some PB blaster, the put the nut back on and give it a few turns. The more blaster and hit it with a mallet a few times and let unit sit 30 mins before trying again. If that does not work make sure the nut is on at least 3 turns and drive it around a but. That might loosen it up.
-
Manzacoty 1
On 4/5/2024 at 6:44 PM, Ramdni said:Wouldn’t play for me at work, played just fine on my phone. Cracked end cap. I see one or two every spring on the sc cooler. Did you have water coming from anywhere else, and do you want to replace the cap yourself?
No water from anywhere else. I pulled the cap and used JB Weld for a temporary fix for now. Can you get a new end cap?
-
EchelonMike 564
4 hours ago, JeffK said:Miami of Ohio represented, plus spent a lot of time (and Halloweens) at OU on Court st. IYKYK
I was 0-3 getting a kid to be a Bobcat...but 3-3 for having Miami Redhawks. :-) Last one graduates next week!
- Steve B. and Bozboat
- 2
-
Manzacoty 1
Just a quick update on this. It’s the end cap that is broken and is about $120 to replace. However, there is an 8 week backlog. Malibu said to use JB weld on the cracks and it should be good to go. I’m letting it cure overnight and I’ll see how it does tomorrow. They said it’s only about 35psi of water going through the intercooler.
- dshack
- 1
-
-
Who's Online 16 Members, 0 Anonymous, 175 Guests (See full list)
-
Member Statistics
42,330
Total Members8,865
Most OnlineNewest Member
TeamsterMark
Joined