Welcome to TheMalibuCrew!
As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!
-
Recent Posts
-
vanamp 1,038
13 minutes ago, dizzygti said:Exactly. Look at that bunk, it's a crap design and only touches the hull at the very leading edge. I always put the trailer in deep and the wife floats on. Power loading isn't necessary unless you have an incapable tow rig and can't get in deep enough. I've got almost 300 hours on this boat all trailering it as a first time boat owner, and never scratched the hull like this, but the dealer does in two launches tuning the rudder? Complete BS...
Get that lowest step in the water and you don't have to show off to get the boat on the trailer.
Depends on the ramp. At my ramp if I put the bunks that deep the bow is under the roller. Wish my ramps were that flat.
-
dizzygti 286
44 minutes ago, Stevo said:There has to be a staple, lag bolt ,screw etc sticking up through the wood , probably didn’t drop the trailer deep enough and voila!!
Exactly. Look at that bunk, it's a crap design and only touches the hull at the very leading edge. I always put the trailer in deep and the wife floats on. Power loading isn't necessary unless you have an incapable tow rig and can't get in deep enough. I've got almost 300 hours on this boat all trailering it as a first time boat owner, and never scratched the hull like this, but the dealer does in two launches tuning the rudder? Complete BS...
Get that lowest step in the water and you don't have to show off to get the boat on the trailer.
-
SkiPablo 163
Westland Sunbrella cover - or Westland Sharkskin Supreme if you are more on a budget. I would double check that there pattern is for same tower.
-
TommyTuna 37
Hi - got my boat in water today from dealer and depth readings were blank and then would show 120ft (lake is max 20ft) then go blank again. I wanted to check wiring and make sure all is well. Where can I find the transducer in a 2022 a22?
-
Stevo 6,960
There has to be a staple, lag bolt ,screw etc sticking up through the wood , probably didn’t drop the trailer deep enough and voila!!
-
-
Who's Online 20 Members, 0 Anonymous, 151 Guests (See full list)
- 4skinuts
- hunter77ah
- teamerickson
- willw
- Ullose272
- NorCalSurfer
- varner
- ahopkins22LSV
- NoTimeLikeNow
- vanamp
- SouthsideBoarder
- Ovaltine
- timkuharski
- surfdude
- Sparky450
- hethj7
- Nick55
- dlb
- BLSousa
- Murphys