Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

can bus wire colors


Recommended Posts

aarondover1

Anyone have a diagram of maliview wiring? Or what color can bus wires are? 2021 23lsv. Looking to add some underwater lights to be controlled  by factory panel.

Link to comment

There are two CAN bus circuits, the wiring is normally blue and white or green and yellow.  If you are planning on connecting underwater lights to the CAN bus, I think you are really barking up the wrong tree.  DO NOT cut, splice, or modify the boat wiring harness.

The boat is already pre-wired for underwater lights and the wiring and plugs are labeled and found on the B2 transom harness.  Each connector is a twin Delphi weatherpack with a blue/yellow and a black wire.  I would recommend only installing the factory underwater light from Malibu.  If you use another type of underwater light, you will need to get a wiring plug, inline fuse, relay, and do some of your own wiring to make it work correctly.

Make sure your boat has the optional Power Module #3 that is located in the observer storage by the battery switch wiring and breakers.  It is needed to control options from the touch screen like the docking lights, underwater lights, heater, seat heater, etc...

  • Like 3
Link to comment

Are you seeking the CAN Bus so you can connect the external RGB controller that would be interfaced with the screen? This would be the only reason to need the CAN. For single color LEDs, you just need to find the pre-wired harness at the transom. Just make sure your lights are not exceeding the capacity of what the factory intended on the underwater light circuit. 

Link to comment
  • 8 months later...
On 4/20/2022 at 2:29 PM, MLA said:

Are you seeking the CAN Bus so you can connect the external RGB controller that would be interfaced with the screen? This would be the only reason to need the CAN. For single color LEDs, you just need to find the pre-wired harness at the transom. Just make sure your lights are not exceeding the capacity of what the factory intended on the underwater light circuit. 

Is this possible?

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...